Skip to content
Yard & Gallon

Project hub · Slabs, footings, posts and steps

Concrete Projects: Slabs, Posts, Steps and Bag Math

Almost every small concrete job comes down to three questions: how much volume you are filling, which product goes in the hole, and how thick it needs to be. Volume is simple geometry. Multiply length × width × thickness in feet and divide by 27 to get cubic yards; a 10 × 10 ft slab 4 inches thick is about 1.23 cubic yards. Round post holes and columns use the area of a circle instead, and steps add up one block per step.

Turning that volume into bags is where most shopping lists go wrong. QUIKRETE's data sheets give 0.60 cubic feet per 80 lb bag, 0.45 for 60 lb and 0.30 for 40 lb, so a single cubic yard (27 cubic feet) is 45 bags of 80 lb mix before waste. Sakrete recommends adding 10% for uneven ground, form bulges and spills. For thickness, QUIKRETE's project guides give 4 inches for patios, sidewalks and driveways that only see passenger cars, and 5 to 6 inches for driveways used by trucks.

Then make sure you are buying the right bag at all. Cement is an ingredient, not a finished product: concrete has gravel in it and is made for slabs and footings, while mortar has none and is made for laying brick and block. Start with the calculator if you know the job, or with the cement guide if the store aisle is the confusing part. Check local codes and your product's label before you pour.

The calculator

Guides

Guides on the way

Being researched and checked against their sources now.

Estimates only. Check local codes and your product's label. See how we check the numbers or browse all calculators.